6OVER4/4/MAXNUM_UNCAMP

Message

6OVER4/4/MAXNUM_UNCAMP:The number of tunnels [number1] configured on the old main control board is greater than the maximum number of tunnels [number2] that can be configured on the new main control board.

Description

The number of the tunnels configured on the old main board was greater than the maximum number of tunnels that can be configured on the new main control board.

Parameters

Parameter Name	Parameter Meaning
[number1]	Indicates the number of tunnels configured on the old main control board.
[number2]	Indicates the number of tunnels configured on the new main control board.

Possible Causes

The specifications of the new version were smaller. As a result, the number of configured tunnels on the old main control board was greater than the maximum number of tunnels that could be configured on the new main control board.

Procedure

Check specifications and configurations to make sure that the specifications of the new main control board are larger than the configurations of the old main control board.