ACL6/4/RPC_FAILED

Message

ACL6/4/RPC_FAILED:Failed to call synchronization IPC! (ErrorCode= [ULONG])

Failed to call synchronization IPC.

Parameter Name	Parameter Meaning
ErrorCode	Indicates the error codes, including the following: 2: indicates that memory allocation for sending messages failed. 3: indicates that synchronizing IPC timed out. 4: indicates that message waiting queue overflowed.

Parameter Name

Parameter Meaning

ErrorCode

Indicates the error codes, including the following:

2: indicates that memory allocation for sending messages failed.

3: indicates that synchronizing IPC timed out.

4: indicates that message waiting queue overflowed.

When the ACL6 module sends information, the RPC failed to call functions.

Run the display device command to check whether the member switch has registered.
- If so, go to step 3.
- If not, go to step 2.
If the member switch has not registered, RPC communication fails, which is normal. This log is informational only, and no action is required.
Collect log information about RPC message sending failures of the member switch, and contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.