ACLE/3/POLICY_APPLY: Failed to apply the policy
to [STRING]. (ErrorInformation=[STRING])
Description
Failed to deliver a traffic policy.
Parameters
Parameter Name
Parameter Meaning
[STRING]
Indicates the view to which a traffic policy is
applied.
ErrorInformation
Indicates the error reason.
Possible Causes
A configuration conflict occurred or resources were
insufficient.
Procedure
Run the display traffic-policy applied-record command to check whether the traffic policy is applied successfully.
If so, no further action is required.
If not, go to step 2.
Check whether MQC has a configuration conflict according
to error information in the logs.
If so, go to step 3.
If not, go to step 4.
Remove the conflicting configuration and reconfigure a
traffic policy. Run the display traffic-policy applied-record command to check whether the new traffic policy is applied successfully.
If so, no further action is required.
If not, go to step 7.
Check whether MQC has insufficient resources according
to error information in the logs.
If so, go to step 5.
If not, go to step 7.
Run the display traffic-policy applied-record command to check whether redundant traffic policies are configured.
If so, go to step 6.
If not, go to step 7.
Delete redundant traffic policies and reconfigure a traffic
policy. Run the display traffic-policy applied-record command to check whether the new traffic policy is applied successfully.
If so, no further action is required.
If not, go to step 7.
Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.