< Home

ALML/4/ENT_PULL_OUT

Message

ALML/4/ENT_PULL_OUT:[STRING] was pulled out.

Description

A board or a subcard is removed.

Parameters

Parameter Name Parameter Meaning
STRING Information about the removed entity. For example, describe information about a board through the board name, board type, or board slot ID.

Possible Causes

  • A board or a subcard is removed manually.
  • The connection between a board or a subcard and the slot is loose.

Procedure

  1. Run the display device command to check whether the subcard or board is installed properly.
    • If so, collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.
    • If not, go to step 2.
  2. Check whether the subcard or board is removed manually.
    • If so, no action is required.
    • If not, install the subcard or board again.
Parent Topic: ALML
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >