ALML/4/SLAVE_TO_MASTER:MPU Slot [ULONG] changes
to master.
Description
The standby switch becomes active.
Parameters
Parameter Name
Parameter Meaning
[ULONG]
Slot ID
Possible Causes
Reason 1:
The slave switchover command is run
to perform active/standby switchover.
Reason 2:
The master switch resets
after it becomes abnormal.
Procedure
Check whether active/standby switchover is triggered using
the slave switchover command for routine maintenance
or triggered after the master switch is removed and then installed or restarted.
If so, no action is required.
If not, go to step 2.
Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.