< Home

AM/4/PREFALLOCFAIL

Message

AM/4/PREFALLOCFAIL: Failed to allocate an IPv6 prefix. (PoolName=[STRING1], ClientId=[STRING2], Reason=[STRING3], UserType=[STRING4])

Description

The DHCPv6 server failed to allocate an IPv6 prefix to a client.

Parameters

Parameter Name Parameter Meaning

PoolName

Address pool name.

ClientId

ID of the client.

Reason

Cause of the failure to allocate an IPv6 prefix to the client.

UserType

User type of the client. The value is DHCP.

Possible Causes

  • IPv6 prefixes in the address pool were used up.
  • The address pool was locked.

Procedure

  • Based on the possible causes, perform the following steps:

    • If IPv6 prefixes in the address pool were used up, run the address prefix ipv6-prefix/ipv6-prefix-length command in the address pool view to extend the range of available IPv6 prefixes in the address pool.
    • If the address pool was locked, check why it is locked and run the undo lock command in the address pool view to unlock the address pool.

Parent Topic: AM
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >