AM/4/IP6ALLOCFAIL

Message

AM/4/IP6ALLOCFAIL: Failed to allocate an IPv6 address. (PoolName=[STRING1], ClientId=[STRING2], Reason=[STRING3], UserType=[STRING4]).

The DHCPv6 server failed to allocate an IPv6 address to a client.

Parameter Name	Parameter Meaning
PoolName	Address pool name.
ClientId	ID of the client.
Reason	Cause of the failure to allocate an IPv6 address to the client.
UserType	User type of the client. The value is DHCP.

Based on the possible causes, perform the following steps:
- If the address pool had no available IPv6 address, run the address prefix ipv6-prefix/ipv6-prefix-length command in the address pool view to extend the range of available IPv6 addresses in the address pool.
- If the address pool was locked, check why it is locked and run the undo lock command in the address pool view to unlock the address pool.
- If the rate at which DHCPv6 users went online exceeded the maximum value, contact technical support personnel.