ASMNG/3/CONFIRM_AS_FAIL: Failed to confirm AS. (AS MAC=[STRING])
Description
Failed to confirm the AS.
Parameters
Parameter Name
Parameter Meaning
AS MAC
Indicates the AS's MAC address.
Possible Causes
Cause 1: Failed to check the record of the authenticated AS.
Cause 2: Failed to add the AS's MAC address to the whitelist.
Procedure
Run the display as command to check whether the AS's MAC address in the command output is consistent with the actual one.
If so, go to step 2.
If not, run the confirm command to confirm the AS allowed to pass authentication. If the fault persists, go to step 2.
A flash failure occurred. Replace this AS. For details, see "Replacing an AS" in the S2720, S5700, and S6700V200R019C10 Configuration Guide - Device Management Configuration - SVF Configuration.
If the fault persists after this AS is replaced, collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.