< Home

ASMNG/3/SAVE_PSK_FAIL

Message

ASMNG/3/SAVE_PSK_FAIL: Failed to save the pre-shared key.

Description

The AS failed to save the pre-shared key to the flash memory.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The AS failed to save the pre-shared key to the flash memory.

Procedure

  1. Enable the AS to save the pre-shared key to the flash memory again after this AS is restarted. For details about restarting an AS, see "Restarting an AS" in the S2720, S5700, and S6700 V200R019C10 Configuration Guide - Device Management Configuration - SVF Configuration.
  2. If the fault persists, a flash failure occurred. Replace this AS. For details, see "Replacing an AS" in the S2720, S5700, and S6700 V200R019C10 Configuration Guide - Device Management Configuration - SVF Configuration.
  3. If the fault persists after this AS is replaced, collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >