ASMNG/3/SEND_PSK_FAIL: Failed to send the pre-shared key to other board. (Slot ID=[INTEGER])
Description
The AS failed to send the pre-shared key to another slot.
Parameters
Parameter Name
Parameter Meaning
Slot ID
Indicates a slot ID.
Possible Causes
The AS failed to send the pre-shared key to another slot.
Procedure
Enable the AS to send the pre-shared key to another slot again after this AS is restarted. For details about restarting an AS, see "Restarting an AS" in the S2720, S5700, and S6700V200R019C10 Configuration Guide - Device Management Configuration - SVF Configuration.
If the fault persists, a flash failure occurred. Replace this AS. For details, see "Replacing an AS" in the S2720, S5700, and S6700V200R019C10 Configuration Guide - Device Management Configuration - SVF Configuration.
If the fault persists after this AS is replaced, collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.