DHCP/4/DHCP_INFO_LOG_DHCP_ADD_ACL_FAILED

Message

DHCP/4/DHCP_INFO_LOG_DHCP_ADD_ACL_FAILED: Add ACL failed because of no enough ACL resources. (Slot=[STRING])

ACL rules failed to be delivered because ACL resources were insufficient.

Parameter Name	Parameter Meaning
Slot	Slot ID.

If the ACL resources are insufficient, the configured DHCP commands do not take effect.

Adjust the usage of ACL resources using either of the following methods:
1. Run the display acl resource command to view information about ACL resources and check services that occupy many ACL resources.
2. Run the display current-configuration command to view configuration information. Delete unused configurations to release ACl resources.
Delete DHCP-related commands and reconfigure commands related to the DHCP service to redeliver the DHCP service. After performing the preceding operations, check whether the log is still generated.
- If the log is not generated, go to step 4.
- If the log is still generated, go to step 3.
Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.
End.