DOT1X/3/MACAUTH_ACL_FAILED: Failed to configure mac authentication because of insufficient resource.(SlotID=[STRING])
Description
MAC address authentication failed to be configured on a VLANIF interface because the ACL resource on the board was insufficient.
Parameters
Parameter Name
Parameter Meaning
SlotID
ID of the slot.
Possible Causes
ACL resources are insufficient.
Procedure
Run the display acl resource command to check whether ACL resources are sufficient.
If not, release ACL resources and then run the display acl resource command to check whether ACL resources are successfully released.
If so, ACLs fail to be delivered to the physical chip. Go to step 2.
Collect log and configuration information, and contact technical support. You can collect diagnostic information using the display diagnostic-information command.