ENERGY_1.3.6.1.4.1.2011.6.157.11.1 hwEnergyDevChangeToSleep

Description

SPM/4/DEVICESLEEP: OID [oid] The device [INTEGER] enters sleeping mode.

The device turned to the sleeping state.

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.157.11.1	Warning	equipmentAlarm(5)

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
INTEGER	Indicates the device ID.

All the chips of the device, except the CPU, are in energy-saving mode. As a result, services on the device are interrupted.

The device turned to the sleeping state.

You can perform any of the following operations to wake the sleeping device:
- Log in to the device through the serial port and press Ctrl+W.
- Turn on the terminal connected to an awakening port. By default, all ports are awakening ports.
- Press the MODE button to wake the sleeping device.
- Wait until the sleeping time range expires (if a time range is configured). The device will wake up automatically. After the device enters the sleeping state, you can log in to the switch through its serial port and press Ctrl+\ to check the remaining sleeping time.

None