EOAM1AG_1.3.6.1.4.1.2011.5.25.136.1.6.32 hwDot1agCfmUnexpectedMEGLevel

Description

EOAM1AG/1/UNEXPECTEDMEGLEVEL: OID [oid] MEP received a CCM with unexpected MEG level. (MdIndex=[GAUGE], MaIndex=[GAUGE], MdName=[STRING], MaName=[STRING], MepId=[INTEGER])

The MD level carried in a CCM sent by the RMEP was different from that specified on the MEP.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.136.1.6.32	Critical	communicationsAlarm(2)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
MdIndex	Index of an MD table
MaIndex	Index of an MA table
MdName	Name of an MD
MaName	Name of an MA
MepId	ID of a MEP

Impact on the System

CFM will fail.

Possible Causes

The MD level carried in a CCM sent by the RMEP was different from that specified on the MEP.

Procedure

Run the display cfm mep [ md md-name [ ma ma-name [ mep-id mep-id ] ] ] command on both the MEP and RMEP to view the value of the Level field. Check whether the MD levels are the same.
- If the MD levels are different, go to Step 2.
- If the MD levels are the same, go to Step 3.
Perform the following steps on the MEP:
1. Run the undo cfm md name md-name command to delete existing MD configurations.
2. Run the cfm md md-name level level command to reconfigure an MD the same as that on the RMEP.
3. Run the display alarm active command to view the trap. Check whether the trap is cleared. If the trap persists, go to Step 3.
Collect alarm information and configuration information, and then contact technical support personnel.