< Home

EOAM1AG_1.3.6.1.4.1.2011.5.25.136.1.6.34 hwDot1agCfmMismerge

Description

EOAM1AG/1/MISMERGE: OID [oid] MEP received a CCM with unexpected MEG ID. (MdIndex=[GAUGE], MaIndex=[GAUGE], MdName=[STRING], MaName=[STRING], MepId=[INTEGER])

An MD or MA name carried in a CCM sent by the RMEP was different from that specified on the MEP.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.136.1.6.34 Critical communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

MdIndex

Index of an MD table

MaIndex

Index of an MA table

MdName

Name of an MD

MaName

Name of an MA

MepId

ID of a MEP

Impact on the System

CFM will fail.

Possible Causes

An MD or MA name carried in a CCM sent by the RMEP was different from that specified on the MEP when the MEP and RMEP had the same MD level and service type in a MEG.

Procedure

  1. Run the display cfm mep [ md md-name [ ma ma-name [ mep-id mep-id ] ] ] command to view the value of the MD Name field on the MEP and RMEP that have the same service type and MD level. Check whether the MD names are the same.

    • If they are the same, go to Step 2.

    • If they are different, go to Step 3.

  2. Run the display cfm mep [ md md-name [ ma ma-name [ mep-id mep-id ] ] ] command to view the value of the MA Name field on the MEP and RMEP that have the same service type, MD level, and MD name. Check whether the MA names are the same.

    • If they are the same, go to Step 5.

    • If they are different, go to Step 4.

  3. Perform the following steps on the MEP:
    1. Run the undo cfm md name md-name command to delete existing MD configurations.
    2. Run the cfm md md-name level level command to reconfigure an MD the same as that on the RMEP.
    3. Run the display alarm active command to check whether the alarm is cleared. If the alarm is cleared, go to Step 6. If the alarm is not cleared, go to Step 5.
  4. Perform the following steps on the MEP:
    1. Run the undo ma ma-name command to delete existing MA configurations.
    2. Run the ma ma-name command to reconfigure an MA the same as that on the RMEP.
    3. Run the display alarm active command to check whether the alarm is cleared. If the alarm is cleared, go to Step 6. If the alarm is not cleared, go to Step 5.
  5. Collect alarm information and configuration information, and then contact technical support personnel.
  6. End.
Parent Topic: EOAM1AG
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >