EOAM1AG_1.3.6.1.4.1.2011.5.25.136.1.6.36 hwDot1agCfmUnexpectedMEP

Description

EOAM1AG/3/UNEXPECTEDMEP: OID [oid] MEP received a CCM with unexpected MEP. (MdIndex=[GAUGE], MaIndex=[GAUGE], MdName=[STRING], MaName=[STRING], MepId=[INTEGER])

The MEP ID carried in a CCM sent by the RMEP was not listed in the RMEP list of the MEP.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.136.1.6.36	Minor	communicationsAlarm(2)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
MdIndex	Index of an MD table
MaIndex	Index of an MA table
MdName	Name of an MD
MaName	Name of an MA
MepId	ID of a MEP

Impact on the System

CFM will fail.

Possible Causes

The MEP ID carried in a received CCM was not listed in the RMEP list of the MEP when the MEP and RMEP have the same MD level and MA ID.

Procedure

Run the display cfm remote-mep [ md md-name ma ma-name mep-id mep-id ] command on the MEP to view the value of the RMEP ID field. Check whether the RMEP ID is displayed in the command output.
- If the RMEP ID is displayed and the fault persists, go to Step 3.
- If the RMEP ID is not displayed, go to Step 2.
Perform the following steps on the MEP:
1. Run the remote-mep mep-id mep-id [ mac mac-address ] command to specify a correct RMEP.
2. Run the display alarm active command to view the trap. Check whether the trap is cleared. If the trap persists, go to Step 3.
Collect alarm information and configuration information, and then contact technical support personnel.