ETRUNK/4/STATE_CHG

Message

ETRUNK/4/STATE_CHG:The status of an E-Trunk changed. (ETrunkId=[ULONG], OldState=[STRING], OldReason=[STRING], NewState=[STRING], NewReason=[STRING])

Description

The status of an E-Trunk changed.

Parameters

Parameter Name	Parameter Meaning
ETrunkId	Indicates the E-Trunk ID.
OldState	Indicates the old state Init: Indicates the initialization state. Backup: Indicates the backup state. Master: Indicates the master state.
OldReason	Indicates the causes of the old state PRI: Indicates the priority calculation. TIMEOUT: Indicates the timeout. PEER_TIMEOUT: Indicates that the peer device times out. INIT: Indicates the initialization.
NewState	Indicates the new state Init: Indicates the initialization state. Backup: Indicates the backup state. Master: Indicates the master state.
NewReason	Indicates the causes of the new state PRI: Indicates the priority calculation. TIMEOUT: Indicates the timeout. PEER_TIMEOUT: Indicates that the peer device times out. INIT: Indicates the initialization.

Possible Causes

The status of an E-Trunk changed or the cause of status changed. For example, the E-Trunk was the backup; when the E-Trunk did not receive protocol packets from the peer device within the timeout period, it became the master.

Procedure

This log message is informational only, and no action is required.