EZOP/3/PROCESS_STOP: Easy-operation upgrade process
has been stopped. (Reason=[STRING])
Description
An EasyDeploy upgrade has stopped.
Parameters
Parameter Name
Parameter Meaning
[STRING]
Indicates the reason why the upgrade process stops.
Possible Causes
The reasons why an EasyDeploy upgrade stops include
but not limit to the following:
1: The device detects inputs on the serial port.
2: The device is upgrading using a USB flash drive.
Procedure
If reason 1 is displayed, stops the operation on the serial
port and restart the EasyDeploy upgrade process. No input is allowed
on the serial port during an EasyDeploy upgrade process.
If reason 2 is displayed, select either EasyDeploy upgrade
or USB-based upgrade.