ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.2.5 hwBoardInvalid

Description

ENTITYTRAP/1/BOARDINVALID: OID [oid] Board is invalid for some reason. (Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]", EntityTrapEntType=[INTEGER], EntityTrapFaultID=[INTEGER])

The board fails.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.219.2.2.5	Critical	equipmentAlarm(5)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
Index	Indicates the index.
EntityPhysicalIndex	Indicates the physical index.
PhysicalName	Indicates the entity name.
EntityTrapEntType	Indicates the entity type.
EntityTrapFaultID	Indicates the error code.

Impact on the System

See the description in the procedure.

Possible Causes

See the description in the procedure.

Procedure

Rectify the fault based on the error code.

Error Code	Possible Causes	Procedure
132626	The power cable connected to the device is loose, the external power line is faulty or the power module of the device has failed.	Check whether the power cable is loose. If so, reconnect the power cable securely and power on the device. If not so, go to step 2. Check whether the external power line is faulty. If so, repair or replace the faulty line and power on the device again. If not so, go to step 3. Check whether the power module of the device is faulty. If so, replace the power module. If the device uses a built-in power module, replace the device. If not so, collect alarm information and configuration information, and then contact technical support personnel.