FSP_1.3.6.1.4.1.2011.5.25.183.1.22.7 hwStackStackMemberLeave

Description

FSP/4/STACKMEMBER_LEAVE: OID [oid] Slot [integer] leaves from stack.

This alarm was generated when a member switch left the stack system.

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.183.1.22.7	Warning	equipmentAlarm(5)

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
[integer]	Stack ID of the device generating the alarm.

The services that are forwarded through the device are interrupted.

1. A switch was manually removed from the stack system.

2. A switch in the stack system was powered off.

3. The stack cable connecting a switch in the stack system was removed or the stack card was loosened.

Check whether the switch was manually removed from the stack system.
- If so, the alarm handling ends.
- If not, go to step 2.
Check whether the switch was manually powered off.
- If so, power on it. The alarm handling ends.
- If not, go to step 3.
Check whether the stack cable of the switch was loose.
- If so, install the stack cable securely. The alarm handling ends.
- If not, go to step 4.
Check whether the stack card to which the stack cable of the switch is connected is loose.
- If so, remove and install the stack card. The alarm handling ends.
- If not, collect alarm information and configuration information, and then contact technical support personnel.

None