FSP/4/TOPO_CHANGE

Message

FSP/4/TOPO_CHANGE: Topology changed from [ULONG1] to [ULONG2](0: link, 1: ring).

The stack topology changed from ring to chain or from chain to ring topology.

Parameter Name	Parameter Meaning
ULONG1	Indicates the original topology.
ULONG2	Indicates the new topology.

Devices were added to or removed from the stack.

Run the display stack port command to check whether devices were added to or removed from the stack normally.
- If so, go to step 2.
- If not, collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.
Check whether these devices need to be added or removed from the stack.
- If so, no action is required.
- If not, remove or connect required devices.