HWCM/4/HWCM_B2S_TRANSFAIL: OID [oid] Failed to transfer the configuration file to (index=[integer]) server [server-ip] through [transport-type] when automatically backing up the configuration.
Failed to set up a connection with the server when backing up the configuration file to the server probably because the configuration parameter was incorrect or the server was unreachable.
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.6.10.2.5 | Warning | processingErrorAlarm(4) |
| Name | Meaning |
|---|---|
| OID | Indicates the MIB object ID of the alarm. |
| index | Indicates the index of the backup server table. |
| [server-ip] | Indicates the IP address of the server. |
| [transport-type] | Indicates the protocol used to transmit backup
configurations. Possible causes can be:
|
This alarm indicates that the configuration file fails to be backed up to the server this time. If this alarm is generated multiple times, the configuration is probably incorrect or the link is probably faulty. You need to check the configuration and network condition.
Y=>2.
N=>4.
If the correct user name and password are used, go to Step 3.
If the correct user name and password are not used, reset the user name and password and go to Step 5.
If the correct path is used, go to Step 4.
If the correct path is not used, reconfigure a path and go to Step 4.