IFPDT_1.3.6.1.4.1.2011.5.25.157.2.239 hwSubIfNumExceededSpecAlarm

Description

IFPDT/3/SUBIFNUMOVERSPEC: OID [OID] The number of subinterfaces on the switch exceeds the limit, which may cause an exception on the switch. (SubIfSpec=[INTEGER])

The number of sub-interfaces on the switch exceeds the maximum value.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.157.2.239	Minor	qualityOfServiceAlarm(3)

Parameters

Name	Meaning
OID	Indicates the MIB object ID of the alarm.
SubIfSpec	Indicates the maximum number of sub-interfaces.

Impact on the System

An exception may occur on the switch.

Possible Causes

During configuration recovery, the system detects that the number of sub-interfaces on the switch exceeds the maximum value.

Procedure

Run the undo interface interface-type interface-number command to delete unused sub-interfaces and check whether the trap is cleared.
1. If the trap is cleared, go to step 3.
2. If the trap is not cleared, go to step 2.
Collect trap, log, and configuration information, and contact technical support personnel.
End.

Related Information

IFPDT_1.3.6.1.4.1.2011.5.25.157.2.240 hwSubIfNumExceededSpecAlarmResume