IPFPM_1.3.6.1.4.1.2011.5.25.316.3.8 hwIpfpmTlpExceed

Description

IPFPM/2/TLP_EXCEED:OID [oid] The number of board tlp exceeded the threshold. (BoardIndex=[BoardIndex], BoardTlpNumber=[BoardTlpNumber], ThresholdValue=[ThresholdValue])

The number of TLPs configured on a device exceeded the TLP threshold.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.316.3.8	Major	qualityOfServiceAlarm(3)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
BoardIndex	Device index
BoardTlpNumber	Number of TLPs configured on a device
ThresholdValue	Number of TLPs allowed by a device

Impact on the System

The number of TLPs configured on a device exceeded the TLP threshold of the device, consuming more device resources. Therefore, the device processing performance is affected.

Possible Causes

The number of TLPs configured on a device exceeded the TLP threshold of the device.

Procedure

Check whether the TLPs on a device are normally configured.
- If so, go to Step 2.
- If not, go to Step 3.
Check whether the normally configured TLPs are referenced by services in the DCP view.
- If so, go to Step 5.
- If not, go to Step 4.
Delete the TLPs that are incorrectly configured and check whether the trap persists.
- If so, go to Step 2.
- If not, go to Step 6.
Delete TLPs that are not referenced by services. Run the display ipfpm dcp command to check the maximum number of TLPs that the device supports. Ensure that the number of TLPs configured on the device is smaller than the maximum number of TLPs that the device supports and check whether the trap persists.
- If so, go to Step 5.
- If not, go to Step 6.
Collect alarm information and configuration information, and then contact technical support personnel.
End.

Related Information

IPFPM_1.3.6.1.4.1.2011.5.25.316.3.9 hwIpfpmTlpRecovery