IPSEC-VPN/4/IKESAPHASE1ESTABLISHED: OID [OID] IKE phase1 sa established. (PeerAddress=[PeerAddress], PeerPort=[PeerPort], LocalAddress=[LocalAddress], AuthMethod=[AuthMethod], AuthID=[AuthID], IDType=[IDType], VsysName=[vsys-name], Role=[Role])
The IKE SA has been established.
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.6.122.26.6.13 | Warning | Communications alarm |
| Name | Meaning |
|---|---|
| OID | Indicates the MIB object ID of the alarm. |
| PeerAddress | Indicates the IP address of the tunnel's remote end. |
| PeerPort | Indicates the port number of the peer end of the IPSec tunnel. |
| LocalAddress | Indicates the IP address of the tunnel's local end. |
| AuthMethod | Indicates the authentication method. |
| AuthID | Indicates the ID of the tunnel's remote end. |
| IDType | Indicates the type of the remote end ID. |
vsys-name |
Indicates the name of the virtual system to which the IKE SA belongs. NOTE:
The device does not support this parameter. |
| Role | Device role during SA negotiation:
|