IPSEC-VPN/4/IPSECTUNNELSTART: OID [oid] The IPSec tunnel is established. (Ifindex=[Ifindex], SeqNum=[SeqNum],TunnelIndex=[TunnelIndex], RuleNum=[RuleNum], DstIP=[DstIP], InsideIP=[InsideIP], RemotePort=[RemotePort], CpuID=[CpuID], SrcIP=[SrcIP], FlowInfo=[FlowInfo], LifeSize=[LifeSize], LifeTime=[LifeTime], VsysName=[vsys-name], InterfaceName=[InterfaceName], SlotID=[SlotID], Role=[Role])
An IPSec tunnel is established.
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.6.122.26.6.1 | Warning | Communications alarm |
| Name | Meaning |
|---|---|
| oid | Indicates the MIB object ID of the alarm. |
| Ifindex | Indicates the interface index. |
| SeqNum | Indicates the policy number. |
| TunnelIndex | Indicates the tunnel index. |
| RuleNum | Indicates the rule number. |
| DstIP | Indicates the IP address of the peer end of the IPSec tunnel. |
| InsideIP | Indicates the intranet IP address of the peer end of the tunnel. |
| RemotePort | Indicates the port number of the peer end of the IPSec tunnel. |
| CpuID | Indicates the CPU number. |
| SrcIP | Indicates the IP address of the local end of the IPSec tunnel. |
| FlowInfo | Indicates the data flow information of the IPSec tunnel, including the source address, destination address, ACL port number, ACL protocol number, and DSCP. |
| LifeSize | Indicates the life cycle of the tunnel, in kbytes. |
| LifeTime | Indicates the life cycle of the tunnel, in seconds. |
vsys-name |
Indicates the name of the virtual system to which the IPSec policy belongs. NOTE:
The device does not support this parameter. |
| InterfaceName | Indicates the interface name. |
| SlotID | Indicates the Slot number. NOTE:
The device does not support this parameter. |
| Role | Device role during SA negotiation:
|