IPSEC-VPN/5/IPSEC_TUNNEL_ESTABLISHED

Message

IPSEC-VPN/5/IPSEC_TUNNEL_ESTABLISHED:An IPSec tunnel is established. (PolicyName=[policy-name], IfIndex=[if-index], SeqNum=[seq-num], RuleNum=[rule-name], SrcIP=[src-ip], DstIP=[dst-ip], Slot=[slot-id], CpuID=[cpu-id], State=[state], Role=[Role])

Description

An IPSec tunnel has been set up successfully.

Parameters

Parameter Name	Parameter Meaning
PolicyName	Indicates an IPSec policy name.
IfIndex	Indicates an interface index.
SeqNum	Indicates the sequence number of the IPSec policy.
RuleNum	Indicates the number of an ACL rule.
SrcIP	Indicates the source IP address of the IPSec tunnel.
DstIP	Indicates the destination IP address of the IPSec tunnel.
Slot	Indicates the slot ID of the Service Processing Unit (SPU).
CpuID	Indicates a CPU ID.
State	Indicates the IPSec tunnel status. Normal: The IPSec tunnel is established between the active device and the remote device. Backup: The IPSec tunnel is established between the standby device and the remote device.
Role	Device role during SA negotiation: Initiator: The device functions as the SA negotiation initiator. Responder: The device functions as the SA negotiation responder.

Possible Causes

An IPSec tunnel is triggered by traffic or auto-negotiation.

Procedure

This log is informational only, and no action is required.