IPV4-IPV6/4/MAXNUM_UNCAMP

Message

IPV4-IPV6/4/MAXNUM_UNCAMP:The number of tunnels [tunnel-number1] configured on the old main control board is greater than the maximum number of tunnels [tunnel-number2] that can be configured on the new main control board.

Description

The number of tunnels configured on the old main control board was greater than the allowable maximum number of tunnels configured on the new main control board.

Parameters

Parameter Name	Parameter Meaning
[tunnel-number1]	Indicates the number of tunnels configured on the old main control board.
[tunnel-number2]	Indicates the allowable maximum number of tunnels configured on the new main control board.

Possible Causes

The specifications of the new version were smaller. As a result, the number of tunnels configured on the old main control board was greater than the allowable maximum number of tunnels configured on the new main control board.

Procedure

Check specifications and configurations to make sure that the specifications of the new main control board are larger than the configurations of the old main control board.