ISIS/6/ADD_MDF_LK_CSPF_FAIL

Message

ISIS/6/ADD_MDF_LK_CSPF_FAIL:ISIS [process-id] failed to modify TE link information in CSPF. (ReturnValue=[ULONG], NeighborSystemId=[STRING], NeighborPseudoNodeId=[USHORT], NodeStatus=[USHORT], FragmentNumber=[USHORT])

Description

IS-IS failed to modify the TE link information in the CSPF.

Parameters

Parameter Name	Parameter Meaning
[process-id]	Indicates the ID of an IS-IS process.
ReturnValue	Indicates a returned value.
NeighborSystemId	Indicates the system ID of a neighbor.
NeighborPseudoNodeId	Indicates the pseudo node ID of a neighbor.
NodeStatus	Indicates the status of a node.
FragmentNumber	Indicates the fragment number.

Possible Causes

1. CSPF was not enabled.

2. The message queue of CSPF was full.

Procedure

Check whether CSPF is enabled.
- If so, go to Step 3.
- If not, go to Step 2.
Enable CSPF, and check whether the log message is displayed again.
- If so, go to Step 3.
- If not, go to Step 4.
Collect log information and configuration information, and then contact technical support personnel.
End.