ISIS/6/ENABLE_TE_LV2_FAIL

Message

ISIS/6/ENABLE_TE_LV2_FAIL:ISIS [process-id] failed to enable TE for Level-2.

IS-IS failed to enable TE for the Level-2 interface.

Parameter Name	Parameter Meaning
[process-id]	Indicates the ID of an IS-IS process.

Failed to enable TE for the Level-2 interface.

Run the display this command in a specified IS-IS process to check whether a NET is configured. If no NET is configured, configure a NET.
Run the traffic-eng command in a specified IS-IS process to re-enable TE.
Collect log information and configuration information, and then contact technical support personnel.