ISIS/4/PEER_DWN_CIRC_SILENT

Message

ISIS/4/PEER_DWN_CIRC_SILENT:ISIS [process-id] neighbor [neighbor] was Down because silent is set on interface [interface-name]. The Hello packet was received at [hello-time] last time; the maximum interval for sending Hello packets was [max-interval]; the local router sent [send-number] Hello packets and received [receive-number] Hello packets; the type of the Hello packet was [packet-type].

Description

The IS-IS neighbor went Down because the interface was configured as a silent interface.

Parameters

Parameter Name	Parameter Meaning
[process-id]	Indicates the ID of an IS-IS process.
[neighbor]	Indicates the system ID of a neighbor.
[interface-name]	Indicates the name of an interface.
[hello-time]	Indicates the time when a Hello packet was received last time.
[max-interval]	Indicates the maximum interval for sending Hello packets.
[send-number]	Indicates the number of Hello packets that were sent.
[receive-number]	Indicates the number of Hello packets that were received.
[packet-type]	Indicates the type of the Hello packet. The type can be P2P: indicates the P2P Hello packet. Lan Level-1: indicates the Hello packet in the Level-1 broadcast network. Lan Level-2: indicates the Hello packet in the Level-2 broadcast network.

Possible Causes

The interface was configured as a silent interface, that is, the interface was suppressed, and thus the IS-IS neighbor went Down.

Procedure

Judge whether the neighbor relationship needs to be established on the interface. If so, go to Step 2; if not, go to Step 3.
Run the undo isis silent command to restore the interface to the default mode.
End.