< Home

ISIS/4/PEER_DWN_ID_CONFLICT

Message

ISIS/4/PEER_DWN_ID_CONFLICT:ISIS [process-id] neighbor [neighbor] was Down on interface [interface-name] because P2P circuit ID conflict. The Hello packet was received at [hello-time] last time; the maximum interval for sending Hello packets was [max-interval]; the local router sent [send-number] Hello packets and received [receive-number] packets; the type of the Hello packet was [packet-type].

Description

The IS-IS neighbor went Down on the interface due to the conflicting P2P circuit IDs.

Parameters

Parameter Name Parameter Meaning
[process-id] Indicates the ID of an IS-IS process.
[neighbor] Indicates the system ID of a neighbor.
[interface-name] Indicates the name of an interface.
[hello-time] Indicates the time when a Hello packet was received last time.
[max-interval] Indicates the maximum interval for sending Hello packets.
[send-number] Indicates the number of Hello packets that were sent.
[receive-number] Indicates the number of Hello packets that were received.
[packet-type] Indicates the type of the Hello packet. The type can be
  • P2P: indicates the P2P Hello packet.

  • Lan Level-1: indicates the Hello packet in the Level-1 broadcast network.

  • Lan Level-2: indicates the Hello packet in the Level-2 broadcast network.

Possible Causes

The circuit IDs on the P2P link conflicted, and thus the IS-IS neighbor went Down.

Procedure

  1. Run the display diagnostic-information command and save the command output; contact technical support personnel.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >