L2IF_1.3.6.1.4.1.2011.5.25.42.3.1.4.4 hwMuxVlanGroupCountExceedThreshold

Description

L2IF/4/MUXVLAN_COUNT_THRESHOLD: OID [oid] The number of group VLANs of the MUX-VLAN's primary VLAN exceeded the upper threshold. (PrincipalVLANId=[INTEGER], UpperThreshold=[INTEGER])

The number of group VLANs configured in the MUX-VLAN's principal VLAN exceeded the upper threshold.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.42.3.1.4.4	Warning	other (1)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
PrincipalVLANId	Principal VLAN ID
UpperThreshold	Upper threshold for the number of group VLANs

Impact on the System

Services will not be affected.

Possible Causes

The number of group VLANs configured in the MUX-VLAN's principal VLAN exceeded the upper threshold.

Procedure

Run the display mux-vlan command to check whether interfaces have been added to the corresponding VLAN, whether interfaces are Up and available and have traffic, and whether all group VLANs are being used. If there is any group VLAN that is not being used, run the undo subordinate group vlan-id1 to [ vlan-id2 ] command in the VLAN view to delete the group VLAN. Check whether the alarm is cleared.
- If the alarm is cleared, go to Step 3.
- If the alarm persists, go to Step 2.
Collect alarm information and configuration information, and then contact technical support personnel.
End.

Related Information

L2IF_1.3.6.1.4.1.2011.5.25.42.3.1.4.5 hwMuxVlanGroupCountExceedThresholdResume