L2IF_1.3.6.1.4.1.2011.5.25.42.3.1.4.6 hwVlantransCountExceedThreshold

Description

L2IF/4/VLANTRANS_COUNT_THRESHOLD: OID [oid] The number of vlan mapping or vlan stacking configurations on the interface exceeded the upper threshold. (PortIndex=[INTEGER], UpperThreshold=[INTEGER])

The number of VLAN mapping configurations, VLAN stacking configurations, or both on the interface exceeded the upper threshold.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.42.3.1.4.6	Warning	other (1)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
PortIndex	Interface index
UpperThreshold	Upper threshold for the number of VLAN mapping configurations, VLAN stacking configurations, or both on the interface

Impact on the System

Services will not be affected.

Possible Causes

The number of VLAN mapping configurations, VLAN stacking configurations, or both on the interface exceeded the upper threshold.

Procedure

Check whether all interfaces having port vlan-stacking and port vlan-mapping configurations are Up and available and have traffic, and whether all VLAN mapping or VLAN stacking configurations have taken effect. Run the undo port vlan-mapping and undo port vlan-stacking commands in the corresponding interface view to delete ineffective VLAN mapping or VLAN stacking configurations. Check whether the alarm is cleared.
- If the alarm is cleared, go to Step 3.
- If the alarm persists, go to Step 2.
Collect alarm information and configuration information, and then contact technical support personnel.
End.

Related Information

L2IF_1.3.6.1.4.1.2011.5.25.42.3.1.4.7 hwVlantransCountExceedThresholdResume