L2V_1.3.6.1.4.1.2011.5.25.119.2.2.3 hwKompellaSwitchWtoP

Description

L2V/2/BGPVC_W2P_T:OID [oid] The status of the Kompella VC turned protecting from working. (VcVpnName=[STRING], CeId=[GAUGE], InterfaceIndex=[INTEGER], RemoteCeId=[GAUGE],CtrlWord=[INTEGER], SecondaryVcRemoteCeId=[GAUGE], HWL2VpnStateChangeReason=[INTEGER])

A Kompella VC was changed from working state to protection state.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.119.2.2.3	Major	processingErrorAlarm(4)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
VcVpnName	Indicates the VPN name.
CeId	Indicates the ID of the local CE.
InterfaceIndex	Indicates the interface index.
RemoteCeId	Indicates the ID of the remote CE.
CtrlWord	Indicates whether the control word is enabled: 1: indicates that the control word is enabled. 2: indicates that the control word is disabled.
SecondaryVcRemoteCeId	Indicates the ID of the remote CE whose VC is in the Protection state.
HWL2VpnStateChangeReason	Indicates the cause of the VC status change. For details, refer to hwKompellaVcStateChangeReason in the appendix of HUAWEI-KOMPELLA-MIB.

Impact on the System

The switchover between the primary VC and the backup VC has no impact on services.

Possible Causes

A Kompella VC was changed from a working link to a protection link.

Procedure

Refer to the solution to the hwKompellaVcDown trap. Then, check whether the fault is rectified.
- If so, go to Step 3.
- If not, go to Step 2.
Collect alarm information and configuration information, and then contact technical support personnel.
End.

Related Information

L2V_1.3.6.1.4.1.2011.5.25.119.2.2.4 hwKompellaSwitchPtoW