L2V_1.3.6.1.4.1.2011.5.25.119.4.1.2.4 hwPWVcUp

Description

L2V/2/PWE3VC_UP_ME_T:OID [oid] The status of the PWE3 VC turned UP. (VcId=[GAUGE], VcType=[INTEGER], PeerAddress=[IPADDR], InterfaceIndex=[INTEGER], VcInboundLabel=[GAUGE], VcOutboundLabel=[GAUGE], SecondaryPw=[INTEGER], HWL2VpnStateChangeReason=[INTEGER], SysUpTime=[TIMETICK], InterfaceName=[STRING], SwitchVcId=[GAUGE], TunnelPolicyName=[STRING], ActiveState=[INTEGER])

The trap was generated when the PWE3 VC was Up.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.119.4.1.2.4	Major	other(1)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
VcId	Indicates the ID of a VC.
VcType	Indicates the type of a VC: 0: Initial value 1: FR 2: ATM AAL5 3: ATM cell relay 4: VLAN 5: Ethernet 6: HDLC 7: PPP 9: ATM cell VCC 10: ATM cell VPC 11: IP-layer 2 (used for heterogeneous IP-interworking between Huawei devices and non-Huawei devices) 12: ATM, 1-to-1 VCC cell mode 13: ATM, 1-to-1 VPC cell mode 14: ATM, AAL5 PDU VCC TRANSPORT 64: Heterogeneous IP-interworking
PeerAddress	Indicates the IP address of a peer.
InterfaceIndex	Indicates the interface index.
VcInboundLabel	Indicates the incoming label of a VC.
VcOutboundLabel	Indicates the outgoing label of a VC.
SecondaryPw	Whether the PW is a secondary PW 1: The PW is a secondary PW. 2: The PW is not a secondary PW.
HWL2VpnStateChangeReason	Indicates the cause for the VC status change.
SysUpTime	Indicates the time for the system startup.
InterfaceName	Indicates the interface name.
SwitchVcId	Switches the ID of VC.
TunnelPolicyName	Indicates the name of a tunnel policy.
ActiveState	Indicates the status of active.

Impact on the System

The PWE3 service is recovered.

Possible Causes

A VC recovers from a fault.

Procedure

This trap message is informational only, and no action is required.

Related Information

L2V_1.3.6.1.4.1.2011.5.25.119.4.1.2.3 hwPWVcDown