L2V_1.3.6.1.4.1.2011.5.25.119.4.1.4.4 hwSvcUp

Description

L2V/2/SVC_UP_T:OID [oid] The status of the SVC VC turned UP. (InterfaceIndex=[INTEGER], InterfaceIndex=[INTEGER], SvcId=[GAUGE], SVcType=[INTEGER], PeerAddress=[IPADDR], SvcInboundLabel=[GAUGE], SvcOutboundLabel=[GAUGE], HWL2VpnStateChangeReason=[INTEGER], InterfaceName=[STRING], TunnelPolicyName=[STRING], ActiveState=[INTEGER])

The trap was generated when the SVC VC was Up.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.119.4.1.4.4	Major	other(1)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
InterfaceIndex	Index of the interface used as the table index.
InterfaceIndex	Index of the interface reported to the network management system as a parameter.
SvcId	Indicates the ID of an SVC.
SVcType	Indicates the type of an SVC: 0: Initial value 1: FR 2: ATM AAL5 3: ATM cell relay 4: VLAN 5: Ethernet 6: HDLC 7: PPP 9: ATM cell VCC 10: ATM cell VPC 11: IP-layer 2 (used for heterogeneous IP-interworking between Huawei devices and non-Huawei devices) 12: ATM, 1-to-1 VCC cell mode 13: ATM, 1-to-1 VPC cell mode 14: ATM, AAL5 PDU VCC TRANSPORT 64: Heterogeneous IP-interworking
PeerAddress	Indicates the IP address of a peer.
SvcInboundLabel	Indicates the incoming label of an SVC.
SvcOutboundLabel	Indicates the outgoing label of an SVC.
HWL2VpnStateChangeReason	Indicates the cause for the SVC status change.
InterfaceName	Indicates the interface name.
TunnelPolicyName	Indicates the name of a tunnel policy.
ActiveState	Indicates the status of active.

Impact on the System

The SVC service is recovered.

Possible Causes

An SVC goes Up.

Procedure

This trap message is informational only, and no action is required.

Related Information

L2V_1.3.6.1.4.1.2011.5.25.119.4.1.4.3 hwSvcDown