L2V/5/BGPVC_W2P:The status of the Kompella VC turned protecting from working. (VcVpnName=[STRING], CeId=[ULONG], RemoteCeId=[ULONG], InterfaceName=[STRING], SecondaryVcRemoteCeId=[ULONG], Reason=[STRING])
This log message explained why the Kompella VC changed from a working link to a protection link.
| Parameter Name | Parameter Meaning |
|---|---|
| VcVpnName | Indicates the name of the Virtual Private Network (VPN). |
| CeId | Indicates the ID of the Customer Edge (CE). |
| RemoteCeId | Indicates the ID of the remote CE. |
| InterfaceName | Indicates the name of the interface. |
| SecondaryVcRemoteCeId | Indicates the secondary VC. |
| Reason | Indicates the cause, including 1 Invalid reason type 2 VC was created 3 VC was deleted 4 LDP session was Down 5 LDP session was Up 6 Same LDP mapping was received with different label and MTU 7 Same LDP mapping was received with matching interface parameters 8 LDP mapping was received with mismatching interface parameters 9 LDP mapping was received with unpass Cbit check 10 LDP mapping was received with unpass PW loop check 11 New LDP mapping was received 12 New LDP mapping was received but remote Vc or local Vc is Down 13 LDP withdrawn message was received 14 LDP release message was received 15 LDP request message was received 16 LDP GR ended processing 17 RSVP message was received 18 Interface was Up 19 Interface was Down 20 Interface encapsulation changed 21 Refresh 22 Download again 23 Tunnel was Up 24 Tunnel was Down 25 VC state changed when New RLB was received 26 RLB was Deleted 27 VC was created or connected to another remote CE 28 Outgoing interface was unavailable 29 Outgoing interface was available 30 LDP notification message was forwarded 31 LDP notification message was not forwarded 32 PW was recreated 33 Download FTN & ILM for EthernetTrunk 34 AC OAM fault detection was disabled 35 Remote AC fault 36 Remote AC fault was resumed 37 Local AC fault 38 Local AC fault was resumed 39 Remote PSN fault 40 Remote PSN fault was resumed 41 Local PSN fault 42 Local PSN fault was resumed 43 Bfd for pw status changed to Down 44 Bfd for pw status changed to UP 45 Bfd for pw status changed to ADMIN DOWN 46 Bfd for pw was disabled 47 Manual set was enabled 48 Manual set was disabled 49 Delay timed out 50 Resume Timed Out |