L2V/5/PWE3VC_BACKUP

Message

L2V/5/PWE3VC_BACKUP:The status of the PWE3 VC turned BACKUP. (VcId=[ULONG], VcType=[string], InterfaceName=[string], SecondaryPw=[string], Reason=[string], SysUpTime=[TIMETICK], PeerAddress=[IPADDR])

Description

The PWE3 VC turned to the backup state.

Parameters

Parameter Name	Parameter Meaning
VcId	Indicates the ID of the VC.
VcType	Indicates the type of the VC.
InterfaceName	Indicates the name of the interface.
SecondaryPw	Indicates the secondary PW.
Reason	Indicates the cause of VC status change: The bound VRRP backup group entered the non-master state. The bound VRRP backup group entered the backup state. The interface board bound to the VRRP backup group was pulled out.
SysUpTime	Indicates the startup time of the system.
PeerAddress	Indicates the IP address of a peer.

Possible Causes

The cause of a VC status change can be one of the following: the bound VRRP backup group entered the non-master state; the bound VRRP backup group entered the backup state; the interface board bound to the VRRP backup group was pulled out.

Procedure

This log message is informational only, and no action is required.