L2V/5/VPLSVC_BACKUP

Message

L2V/5/VPLSVC_BACKUP:The status of the VPLS VC turned BACKUP. (VsiName=[string], RemoteIp=[IPADDR], PwId=[ULONG], Reason=[string], SysUpTime=[TIMETICK])

Description

The VPLS VC turned to the backup state.

Parameters

Parameter Name	Parameter Meaning
VsiName	Indicates the name of the VSI.
RemoteIp	Indicates the IP address of the remote end.
PwId	Indicates the ID of the PW.
Reason	Indicates the cause of VC status change: The bound VRRP turned to a non-master state, such as the backup state. The interface board bound to VRRP was pulled out.
SysUpTime	Indicates the startup time of the system.

Possible Causes

The bound VRRP turned to a non-master state, such as the backup state or the interface board bound to VRRP was pulled out.

Procedure

This log message is informational only, and no action is required.