L3MB_1.3.6.1.4.1.2011.5.25.227.2.1.12 hwBoardServiceFailed

Description

L3MB/4/SERVICEFAILED: OID [OID] Failed to execute the command.(Command=[OCTET],ViewName=[OCTET],ReasonID=[INTEGER],ReasonDescr=[OCTET],Slot=[OCTET])

The card fails to execute the globally delivered command due to insufficient Layer 2 user entries.

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.227.2.1.12	Warning	equipmentAlarm (5)

Name	Meaning
OID	Indicates the MIB object ID of the alarm.
Command	Indicates the command name.
ViewName	Indicates the view name.
ReasonID	Indicates an alarm reason ID. l2UserEntryOverload(92): insufficient Layer 2 user entries.
ReasonDescr	Indicates the alarm reason description.
Slot	Indicates the slot ID.

The card fails to execute the command.

The Layer 2 user entries on the card are insufficient.

Check whether some MAC addresses have been configured as BPDU MAC addresses using the bpdu mac-address command. If so, delete unnecessary BPDU MAC addresses to release entry resources used by BPDU MAC addresses.
Check the VRRP configuration on the switch and delete unnecessary VRRP groups to release entry resources used by VRRP virtual MAC addresses.
Check the interface configuration on the switch and delete unnecessary VLANIF interfaces and Layer 3 subinterfaces to release MAC address entry resources used by these interfaces.
Release entry resources using the preceding steps, delete the globally delivered command that fails to be executed by the card in the system view, and then execute this command again.
If the preceding steps cannot resolve the entry insufficiency issue, collect alarms, logs, and configurations on the switch and contact technical support personnel.

None