L3VPN/4/ROUTE_MID_EXCEEDED

Message

L3VPN/4/ROUTE_MID_EXCEEDED:The total number of routes in VPN instance [vpn-instance] was [route-number], which exceeded the alarm threshold [threshold-value].

Description

The number of routes exceeded the alarm threshold for the number of routes.

Parameters

Parameter Name	Parameter Meaning
[vpn-instance]	Indicates the name of the VPN instance.
[route-number]	Indicates the number of the current routes.
[threshold-value]	Indicates the alarm threshold for the number of routes.

Possible Causes

After the number of routes in the routing table reached the alarm threshold, new routes continued to be added.

Procedure

Run the display ip routing-table vpn-instance [ vpn-instance-name ] statistics command to check the total number and types of routes in this VPN instance.
Analyze the source of each route and check whether the number of current routes in the VPN instance meets the requirement.
- If so, go to Step 4.
- If not, go to Step 3.
Delete unnecessary private routes, and then check whether the number of routes still reaches or exceeds the alarm threshold.
- If so, go to Step 5.
- If not, go to Step 6.
Enter the VPN instance view and run the display this command to check the configuration of route limit to check whether the set alarm threshold of private routes is proper.
- If so, go to Step 5.
- If not, run the routing-table limit number { alert-percent | simply-alert } command to re-configure a proper alarm threshold. Then, go to Step 6.
Collect log information and configuration information, and then contact technical support personnel.
End.