LOAD/6/SLOTLEFT

Message

LOAD/6/SLOTLEFT:Slot [ULONG] left the stack.

A member switch left a stack system.

Parameter Name	Parameter Meaning
[ULONG]	Stack ID, which is an integer that ranges from 0 to 8.

The stack is divided and member switches leave the stack system.

Check whether the user divides the stack system. If yes, no action is required. If no, go to the next step.
Check whether the member switch powers off. If yes, power on it and the device automatically merges the stack. If no, go to the next step.
Check whether the stack configuration is deleted or modified by other user mistakenly.
Run the display stack current-configuration command to check whether the stack configuration is modified. If the stack configuration is modified, restore the original configuration and check whether the stack is merged. If the stack configuration is not modified or the stack is not merged, go to the next step.
Check whether the stack link is faulty.
Run the display stack port command to check whether the stack links are in Up state and whether packets are sent and received properly. If the ports are in Down state or a small number of packets are sent and received, the stack links connected to the port are faulty. Replace the stack cables or optical modules.

If the stack links are normal and the stack is still not merged, go to the next step.
Contact technical support personnel.