LSPM_1.3.6.1.2.1.10.166.3.0.1 mplsTunnelUp

Description

LSPM/2/MPLSTUNNELUP:OID [oid] Tunnel Changes to Up.(SessionTunnelId=[integer], LocalLspId=[integer], IngressLsrId=[integer], EgressLsrId=[integer], OutIfIndex=[integer], mplsTunnelAdminStatus=[integer], mplsTunnelOperStatus=[integer], mplsTunnelIfName=[octet], OutIfName=[octet], mplsTunnelDownReason=[integer])

A trap was generated when a tunnel was established successfully and was Up.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.2.1.10.166.3.0.1	Major	communicationsAlarm(2)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
SessionTunnelId	Indicates the ID of the tunnel.
LocalLspId	Indicates the LSP ID of a session.
IngressLsrId	Indicates the LSR ID of the ingress on the tunnel.
EgressLsrId	Indicates the LSR ID of the egress on the tunnel.
OutIfIndex	Indicates the outgoing interface index of the ingress of the LSP that goes Up.
mplsTunnelAdminStatus	Indicates the management status of the tunnel. 1: Up 2: Down
mplsTunnelOperStatus	Indicates the operating status of the tunnel: 1: Up 2: Down
mplsTunnelIfName	Indicates the name of a tunnel.
OutIfName	Indicates the name of the outgoing interface on the ingress of the LSP that goes Up.
mplsTunnelDownReason	Indicates the reason of Tunnel down. 1: other 2: staticLspDown 3: staticCrlspDown 4: outIfDown 5: resourcePreempted 6: rsvpMessageTimeout 7: rsvpNbrLost 8: bypassTunnelDownOrUnbinded 100: clear

Impact on the System

Services will not be affected.

Possible Causes

The tunnel was created successfully.

Procedure

This trap message is informational only, and no action is required.

Related Information

LSPM_1.3.6.1.2.1.10.166.3.0.2 mplsTunnelDown