LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.3 hwMplsStaticCRLSPUp

Description

LSPM/2/STATICCRLSPUP: OID [oid] Static CR-LSP went Up. (LspIndex=[octet], InSegmentIndex=[octet], OutSegmentIndex=[octet], OutIfIndex=[integer], LspName=[octet], LspStatus=[integer], OutIfName=[octet], InIfIndex=[octet], InIfName=[octet], DownReason=[integer])

The private trap message was output when the static CR-LSP was in the Up state.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.121.2.1.3	Major	communicationsAlarm(2)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
LspIndex	Indicates the index of the LSP.
InSegmentIndex	Indicates the inSegment index of an Up static LSP.
OutSegmentIndex	Indicates the outSegment index of an Up static LSP.
OutIfIndex	Indicates the outbound interface index of an Up static LSP.
LspName	Indicates the name of an Up static LSP.
LspStatus	Indicates the status of an Up static LSP.
OutIfName	Indicates the outbound interface name of an Up static LSP.
InIfIndex	Indicates the inbound interface index of an Up static LSP.
InIfName	Indicates the inbound interface name of an Up static LSP.
DownReason	Indicates the reason that the static LSP down.

Impact on the System

Services will not be affected.

Possible Causes

1. The interface was Up.

2. The link was recovered or the new static CR-LSPs were configured.

Procedure

This trap message is informational only, and no action is required.

Related Information

LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.4 hwMplsStaticCRLspDown