LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.59 hwMplsExtTunnelDownClear

Description

LSPM/2/MPLSEXTTUNNELDOWNCLEAR:OID [oid] The TE tunnel Down alarm was cleared.(SessionTunnelId=[integer], LocalLspId=[integer], IngressLsrId=[integer], EgressLsrId=[integer], OutIfIndex=[integer], hwMplsTunnelInterfaceName=[octet], hwMplsTunnelType=[integer], hwMplsTunnelAdminStatus=[integer], hwMplsTunnelOperStatus=[integer], hwMplsTunnelDownReason=[integer], OutIfName=[octet])

The TE tunnel Down alarm was cleared.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.121.2.1.59	Major	communicationsAlarm(2)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
SessionTunnelId	Indicates the ID of the tunnel.
LocalLspId	Indicates the local LSP ID of a tunnel.
IngressLsrId	Indicates the LSR ID of the ingress on the tunnel.
EgressLsrId	Indicates the LSR ID of the egress on the tunnel.
OutIfIndex	Indicates the index of the outbound interface.
hwMplsTunnelInterfaceName	Indicates the name of a TE tunnel interface.
hwMplsTunnelType	Indicates the type of a tunnel.
hwMplsTunnelAdminStatus	Indicates the management status of a tunnel.
hwMplsTunnelOperStatus	Indicates the running status of a tunnel.
hwMplsTunnelDownReason	Indicates the reason why a tunnel goes Down.
OutIfName	Indicates the name of the outbound interface.

Impact on the System

Services will not be affected.

Possible Causes

The tunnel was successfully set up or the attributes of the tunnel changed.

Procedure

This trap message is informational only, and no action is required.

Related Information

LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.58 hwMplsExtTunnelDown