LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.73 hwMplsResourceTotalCountExceed

Description

LSPM/2/MPLSRESOURCETOTALCOUNTEXCEED: OID [oid] The number of used MPLS resources reached the maximum number. (hwMplsResourceType=[integer], hwMplsResourceTotalCount=[integer])

The number of used MPLS resources reached the maximum number of MPLS resources supported by a device.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.121.2.1.73	Major	qualityOfServiceAlarm(3)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
hwMplsResourceType	Type of MPLS resource
hwMplsResourceTotalCount	Maximum number of MPLS resources supported by a device

Impact on the System

If new MPLS services are created after the number of existing MPLS resources of a specific type has reached the maximum number, services may be affected.

Possible Causes

The number of used MPLS resources reached the maximum number of MPLS resources supported by a device.

Procedure

Check the hwMplsResourceType field and obtain the MPLS resource type.
Delete configurations that use MPLS resources or configurations or messages that trigger MPLS resource consumption to reduce MPLS resource usage. Then check whether the alarm is cleared.
- If the alarm is cleared, go to Step 4.
- If the alarm persists, go to Step 3.
Collect alarm information and configuration information, and then contact technical support personnel.
End.

Related Information

LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.74 hwMplsResourceTotalCountExceedClear