LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.77 hwMplsTunnelCommitLost

Description

LSPM/2/MplsTunnelCommitLost: OID [oid] The configurations of some MPLS TE tunnels were not committed. Related MPLS TE tunnels fail to go Up after the device is restarted.

The configuration of an MPLS TE tunnel was not committed. The MPLS TE tunnel will not go Up after the device is restarted.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.121.2.1.77	Major	operationalViolation(8)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.

Impact on the System

After the device saves the configurations and restarts, the MPLS TE tunnel fails to go Up.

Possible Causes

The configuration of an MPLS TE tunnel was not committed.

Procedure

Check the configurations of all MPLS TE tunnels. Check whether some tunnel configurations are not committed based on service deployment information. Run the display current-configuration interface Tunnel command and find each tunnel interface on which the mpls te commit command is not run.
Confirm whether the mpls te commit command needs to run to commit the configurations of each MPLS TE tunnel.
- If the configuration needs to be committed, run the mpls te commit command on the tunnel interface and go to Step 3.
- If the configuration does not need to be committed, go to Step 3.
End.

Related Information

LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.78 hwMplsTunnelCommitLostClear