LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.80 hwMplsTunnelHotstandbyResume

Description

LSPM/2/MPLSTUNNELHOTSTANDBYRESUME:OID [oid] Traffic switched back from the hot-standby LSP to the primary LSP.(SessionTunnelId=[integer], LocalLspId=[integer], IngressLsrId=[integer], EgressLsrId=[integer], TunnelName=[OCTET])

The trap message was output when the primary LSP went Up and traffic was switched back from the hot-standby LSP to the primary LSP.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.5.25.121.2.1.80	Major	communicationsAlarm(2)

Parameters

Name	Meaning
oid	Indicates the MIB object ID of the alarm.
SessionTunnelId	Indicates the ID of the tunnel.
LocalLspId	Indicates the local LSP ID of a tunnel.
IngressLsrId	Indicates the LSR ID of the ingress on the tunnel.
EgressLsrId	Indicates the LSR ID of the egress on the tunnel.
TunnelName	Indicates the tunnel name.

Impact on the System

Services will not be affected.

Possible Causes

When the tunnel was in the HSB inuse state, the status of the primary LSP changed from Down to Up.

Procedure

This trap message is informational only, and no action is required.

Related Information

LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.79 hwMplsTunnelHotstandbySwitch