< Home

LSPM/4/SWITCH_TO_PT_FAIL

Message

LSPM/4/SWITCH_TO_PT_FAIL: Cannot switch to protection tunnel, the protection tunnel is unavailable.

Description

Failed to switch the working tunnel to the protection tunnel because the protection tunnel was unavailable.

Parameters

Parameter Name Parameter Meaning

None

None

Possible Causes

Switching the working tunnel to the protection tunnel cannot be performed because the protection tunnel was unavailable.

Procedure

  1. Configure the protection group and perform tunnel switching.
  2. Check the status of the protection tunnel.
  3. Collect log information and configuration information, and then contact technical support personnel.
Parent Topic: LSPM
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >